This study provides a risk assessment and risk maps related to the consumption of water contaminated by Al, Ba, Fe and Pb in an industrial area in the Brazilian Amazon. A total of 120 samples of drinking water were collected from 26 locations in the municipality of Barcarena, Pará State. Multiple elements were analyzed by inductively coupled plasma optical emission spectrometry. The quantifiable elements in the samples were Al, Ba, Fe and Pb. Risk assessment was performed according to U.S. Environmental Protection Agency (USEPA) procedures. Results indicate that the highest potential risk of non-carcinogenic adverse health effects for Al was in São João Island; for Ba, Fe and Pb (hazard quotient (HQ) > 1) were in Porto da Balsa community, in the city of Barcarena and Distrito Industrial community, respectively. Maps showed that areas located near Barcarena’s industrial complex are the most affected by water contamination. Therefore, these populations are at higher risk of non-carcinogenic problems, especially children and the elderly, since the majority of the population resides in these areas. Geospatial analysis contributed to delimiting and analyzing risk-change trends in the region, expanding the scope of results to a decision-making process.

A novel carbon composite was prepared from a mixture of coffee waste and clay with inorganic:organic ratio of 1.3 (CC-1.3). The mixture was pyrolysed at 700 °C. Considering the application of this adsorbent for removal of anionic dyes, the CC-1.3 was treated with a 6 mol L-1 HCl for 24 h to obtain ACC-1.3. Fourier transform infrared (FTIR), N2 adsorption/desorption curves, scanning electron microscope (SEM) and powder X-ray diffractometry (XRD) were used for characterisation of CC-1.3 and ACC-1.3 carbon adsorbents. The adsorbents were effectively utilised for removal of reactive blue 19 (RB-19) and reactive violet 5 (RV-5) textile dyes from aqueous solutions. The maximum amounts of RB-19 dye adsorbed at 25 °C are 63.59 (CC-1.3) and 110.6 mg g-1 (ACC-1.3), and 54.34 (CC-1.3) and 94.32 mg g-1 (ACC-1.3) for RV-5 dye. Four simulated dye-house effluents were used to test the application of the adsorbents for treatment of effluents.